Specific bearing load [N/mm2]

If H5, the value of fH indicated by the broken line can be used.

φ = angle of oscillation = 2βA complete oscillation is frompoint 0 to point 4 (= 4β)

steel/bronzesteel/steel

For detailed information about material code → table 1

NoteIf Fa / Fr2, use a thrust spherical plain bearing instead, or contact the SKF application engineering service.

Lbearing = f (Lraceways, Lrolling elements, Lcage, Llubricant, Lseals)

Housing seriesRoller bearing unit SNL 5 seriesSKF ConCentra roller bearing units in the SYNT seriesFNL seriesSKF ConCentra roller bearing units in the FYNT series

NoteIf Fr / Fa0.5, use an angular contact spherical plain bearing instead, or contact the SKF application engineering service.

All ISO tolerance classes are valid with the envelope requirement (such as E7) in accordance with ISO 14405-1:2010.