Tolerances for composite thrust washers
| Dimension | Deviations | |||
| PTFE composite
(designation suffix E) |
POM composite
(designation suffix M) |
|||
| high | low | high | low | |
| – | mm | |||
| Bore diameter d | +0,250 | 0 | +0,250 | 0 |
| Outside diameter D | 0 | -0,250 | 0 | -0,250 |
| Hole pitch diameter J | +0,150 | -0,150 | +0,150 | -0,150 |
| Hole diameter K | +0,150 | -0,150 | +0,150 | -0,150 |
| Height H | 0 | -0,050 | 0 | -0,100 |
