Tolerances of insert bearings for high temperature applications
| Nominal
diameter |
Bore
diameter1) |
Outside
diameter |
|||
| d, D | Deviation | Deviation | |||
| > | ≤ | U | L | U | L |
| mm | μm | μm | |||
| 18 | 30 | +18 | 0 | – | – |
| 30 | 50 | +21 | 0 | 0 | –10 |
| 50 | 80 | +24 | 0 | 0 | –10 |
| 80 | 120 | +28 | 0 | 0 | –15 |
- 1) Values in accordance with ISO 9628.
