Geometrical accuracy of the housing bore and side faces for bearings for bolt mounting and cartridge
 | |||||
| Housing diameter | Tolerance | Total axial run-out | |||
| Da, D2 | H6
|
t1 | |||
| over | incl. | high | low | max. | |
| mm | µm | µm | |||
| 50 | 80 | 19 | 0 | 5 | |
| 80 | 120 | 22 | 0 | 6 | |
| 120 | 150 | 25 | 0 | 8 | |
| 第三代Lockview网站限制访问系统 | × |
| |||||
| Housing diameter | Tolerance | Total axial run-out | |||
| Da, D2 | H6
|
t1 | |||
| over | incl. | high | low | max. | |
| mm | µm | µm | |||
| 50 | 80 | 19 | 0 | 5 | |
| 80 | 120 | 22 | 0 | 6 | |
| 120 | 150 | 25 | 0 | 8 | |
