Tolerances in accordance with ISO 3601-1:2012 Class B
 | ||
| Inside diameter ID | ||
| The tolerance ΔID can be calculated using | ||
| ΔID = ±[(ID0,95 x 0,009) + 0,11] | ||
| Calculation example:
What is the tolerance ΔID of an O-ring with ID = 94,5 mm? | ||
| ΔID = ±[(94,50,95 x 0,009) + 0,11]
= ±[(75,277 x 0,009) + 0,11] = ±[0,677 + 0,11] = ±0,79 mm | ||
|
Cross section diameter CS |
Tolerance | |
| over | incl. | |
| mm | mm | |
| 0,8 | 2,25 | ± 0,08 |
| 2,25 | 3,15 | ± 0,09 |
| 3,15 | 4,5 | ± 0,1 |
| 4,5 | 6,3 | ± 0,13 |
| 6,3 | 8,4 | ± 0,15 |
