Tolerances of cartridge units
| d | tΔds, tΔdmp | tΔD2s | tΔTs | tSia1) | ||||
| > | ≤ | U | L | U | L | U | L | |
| mm | µm | µm | µm | µm | ||||
| 18 | 30 | 0 | –4 | 0 | –13 | 0 | –1,5 | 2,5 |
| 30 |
50 |
0 | –5 | 0 | –15 | 0 | –1,5 | 2,5 |
|
50 |
60 |
0 | –5 | 0 | –18 | 0 | –1,5 | 2,5 |
Tolerance symbols and definitions → table
-
1)
Axial run-out of a single bearing. The tolerance for the rectangularity of the flange
to the housing seat diameter D2 is 5 to 10 µm depending on the size.
