Permissible length of a shaft end
 | ||||||
|
Housing Size |
Dimensions |
Appropriate bearing Designation |
Dimensions |
|||
| ba1) | bc | Ca | B | bb | ||
| – | mm | – | mm | |||
| SNLN 3024 | 48 | 70 | 70 | 23024 | 46 | 45 |
| SNLN 3026 | 52 | 76 | 79 | 23026 | 52 | 49 |
| SNLN 3028 | 53 | 75 | 79 | 23028 | 53 | 50,5 |
| SNLN 3030 | 57 | 82 | 86 | 23030 | 56 | 54 |
| SNLN 3032 | 60 | 82 | 90 | 23032 | 60 | 57,5 |
| SNLN 3034 | 65 | 87 | 87 | 23034 | 67 | 62 |
| SNLN 3036 | 69 | 94 | 94 | 23036 | 74 | 66,5 |
| SNLN 3038 | 71 | 99 | 95 | 23038 | 75 | 68 |
| SNLN 3040 | 75 | 98 | 102 | 23040 | 82 | 72,5 |
| SNLN 3044 | 89 | 108 | 110 | 23044 | 90 | 86 |
| SNLN 3048 | 95 | 110 | 112 | 23048 | 92 | 92 |
| SNLN 3052 | 101 | 120 | 124 | 23052 | 104 | 98 |
| SNLN 3056 | 106 | 123 | 126 | 23056 | 106 | 103 |
- 1) For the non-locating bearing position, the values for ba must be adjusted if the bearing is not centred in the housing seat.
