Tolerances for needle roller thrust bearings
 | ||||
|
Bearing component Dimensions |
Tolerance, tolerance class 1), standard
|
|||
| Needle roller and cage thrust assemblies, AXK | ||||
| Bore diameter | d | E12 | ||
| Outside diameter | D | c13 | ||
| Roller diameter | Dw |
Grade 2, ISO 3096 | ||
| Needle roller thrust bearings with a centring flange, AXW | ||||
| Bore diameter | d
|
E12
|
||
| Outside diameter | D
|
– | ||
| Thickness | B
|
0/–0,2 mm
|
||
| Roller diameter
|
Dw |
Grade 2, ISO 3096 | ||
|
Universal washers, LS |
||||
| Bore diameter | d
|
E12
|
||
| Outside diameter | D
|
a12
|
||
| Thickness | B
|
h11
|
||
| Axial run-out
|
si |
Normal, ISO 199
|
||
| Thin universal washers, AS | ||||
| Bore diameter | d
|
E13
|
||
| Outside diameter | D
|
e13
|
||
| Thickness (1 mm)
|
B1 |
±0,05 mm
|
||
- 1) Envelope requirement (symbol Ⓔ from ISO 14405-1) not written but applies.
