Tolerances for cylindrical roller thrust bearings
 | ||
|
Bearing component Dimensions |
Tolerance, tolerance class1), standard
|
|
| Cylindrical roller and cage thrust assemblies, K | ||
| Bore diameter | d | E11 |
| Outside diameter | D | a13 |
| Roller diameter | Dw |
ISO 12297 |
| Shaft washers, WS | ||
| Bore diameter | d
|
Normal, ISO 199
|
| Outside diameter | d1 |
– |
| Thickness | B
|
h11
|
| Axial run-out
|
si |
Normal, ISO 199
|
| Housing washers, GS | ||
| Outside diameter | D
|
Normal, ISO 199
|
| Bore diameter | D1 |
–
|
| Thickness | B
|
h11
|
| Axial run-out
|
se |
Normal, ISO 199
|
Universal washers, LS |
||
| Bore diameter | d
|
E12
|
| Outside diameter | D
|
a12
|
| Thickness | B
|
h11
|
| Axial run-out
|
si |
Normal, ISO 199
|
- 1) Envelope requirement (symbol Ⓔ from ISO 14405-1) not written but applies.
