|
Standard seal design for
basic design bearings
|
Standard seal design for
SKF Explorer bearings |
Upgraded seal design for
optimized SKF Explorer bearings
|
|
 |
|
|
Seal design
|
C-shaped design
|
C-shaped design |
Compact design
|
Materials
|
Sheet steel reinforced FKM
|
Sheet steel reinforced HNBR |
Sheet steel reinforced HNBR |
Designation
suffixes
For additional
information
→ Designation system
|
|
|
E8(X)1
|
Characteristics/
features |
- radial shaft seal with garter spring
- double lip design
- fitted into a recess in the outer ring
- thermal and chemical stability to withstand high sliding velocities
- suitable for both grease and oil-air lubrication
|
- radial shaft seal with garter spring
- single lip design
- snapped into a recess in the outer ring
- thermal and chemical stability to withstand high sliding velocities
- suitable for both grease and oil-air lubrication
|
- compact single lip design, snapped into a recess in the outer ring
- identical internal geometry as open bearings enables identical basic load rating as for open bearings in same size and higher load carrying capacity compared to standard (C-shaped) designs
- enables total interchangeability of open bearings with those with upgraded seal design (→ SKF Explorer bearings)
- no garter spring
- improved sealing effectiveness
- reduced friction and operating temperature of the seal lip
- thermal and chemical stability to withstand high sliding velocities
- suitable for both grease and oil-air lubrication
|
